Garage Door Installation & Repairs

GDO-2 Control Boards

The following Control Boards are compatible with ATA GDO-2 Panel/Tilt door openers.

CB-8 v3.04 CONTROL BOARD

Suitable for use on GDO-2 garage door openers utilizing the 27mhz code-set frequency.

CB-8 v5.11 CONTROL BOARD

Suitable for use on GDO-2 garage door openers utilizing the 27mhz rolling-code frequency.

CB-8 v6.01a CONTROL BOARD

Suitable for use on GDO-2 garage door openers utilizing the 433mhz code-hopping frequency.

CB-8 v7.02B CONTROL BOARD

Suitable for use on GDO-2 garage door openers utilizing the 433mhz code-hopping frequency and Automatic Limits Programming System (ALPS).

GDO-4 Control Boards

The following Control Boards are compatible with ATA GDO-4 Roller door openers.

CB-7 v1.01 CONTROL BOARD

Suitable for use on GDO-4 garage door openers utilizing the 27mhz code-set frequency.

CB-7 v4.01c CONTROL BOARD

Suitable for use on GDO-4 garage door openers utilizing the 433mhz code-hopping frequency.

CB-7 v5.04 CONTROL BOARD

Suitable for use on GDO-4 garage door openers utilizing the 433mhz code-hopping frequency and Automatic Limits Programming System (ALPS).

GDO-6 Control Boards

The following Control Boards are compatible with ATA GDO-6 Roller door openers.

CB-15 v1.09 + v1.10 CONTROL BOARD

Suitable for use on GDO-6 garage door openers utilizing the 433mhz code-hopping frequency.

DCB-03 1.01a CONTROL BOARD

Suitable for use on GDO-6 garage door openers utilizing the TrioCode technology.

GDO-7 Control Boards

The following Control Boards are compatible with ATA GDO-7 Panel/Tilt door openers.

CB-18 v1.02

Suitable for use on GDO-7 garage door openers utilizing the 433mhz code-hopping frequency.

ACB-05 1.01a CONTROL BOARD

Suitable for use on GDO-7 garage door openers utilizing the TrioCode technology.

GDO-8 Control Boards

The following Control Boards are compatible with ATA GDO-8 Roller door openers.

CB-17 v1.04 CONTROL BOARD

Suitable for use on GDO-8 garage door openers utilizing the 433mhz code-hopping frequency.

DCB-04 1.02b CONTROL BOARD

Suitable for use on GDO-8 garage door openers utilizing the TrioCode technology.

GDO-9 Control Boards

The following Control Boards are compatible with ATA GDO-9 Panel/Tilt door openers.

CBP-15 v1.10 CONTROL BOARD

Suitable for use on GDO-9 garage door openers utilizing the 433mhz code-hopping frequency and Automatic Limit Programming System (ALPS).

DCB-03 v1.01a CONTROL BOARD

Suitable for use on GDO-9 garage door openers utilizing the TrioCode technology and Automatic Limit Programming System (ALPS).

Gate Control Boards

The following Control Boards are compatible with various ATA gate systems.

CB-6 CONTROL BOARD

Suitable for use on industrial garage and gate openers.

ATA DCB-05 CONTROL BOX

Suitable for 12-24v gate openers. Supplied with 2 remote controls and antenna.