Programming Your Remote into your Opener
- Depending on the motor, press and hold the door code button or the SW1/SW2 button.
- Press one of the buttons on your remote for two seconds and then release.
- Press the same button on your remote again for two seconds and then release.
- Let go of the door code, SW1 or SW2 button.
Deleting the codes from your Opener
- Turn off your opener at the power point.
- Depending on the motor, press and hold the door code button or the SW1/SW2 button.
- Turn the power point to the opener back on.
- After 15 seconds release the door code, or SW1/SW2 button.
- Test your remotes to make sure they no longer operate the opener.