Genuine HC106
Coding your Remote into the Opener
- Press the ‘Learn’ button once and release it when the led above it illuminates.
- Press any one button on the remote (which ever one you want to control the door) for about 2 seconds, the ‘Learn Led’ will switch off. Release the button and press again for 2 seconds, the ‘Learn Led’ will begin to flash. When the LED stops flashing, the remote code is programmed.
- To test for correct coding, press the programmed button on the remote and the opener should be activated.
- Repeat steps 1 to 3 to program more remotes. The system can store up to 6 remote codes. If the 7th are programmed into, the first coded previously will be deleted automatically.
Deleting the Codes from your Opener
- Press and hold the ‘Learn’ button for 5 seconds. When the ‘Learn Led’ switches off, all of the programmed codes are deleted.