B&D Obsolete Parts

B&D™ MPC1 Reconditioned Control Panel

Suitable for use on B&D MPC1 Roller door openers.

When might you need this?
The unit seems to be “forgetting” your remotes, and you find yourself constantly needing to program it in. Also, the unit may not be allowing you to set the limits.

Note: Due to limited stock, please call us on 03 8789 3221 prior to purchase to ensure availability. Also, the covers are not reconditioned as they’re for protective measures.

B&D™ MPC2 Reconditioned Control Panel

Suitable for use on B&D MPC2 Roller door openers.

When you might need this?
The unit seems to be “forgetting” your remotes, and you find yourself constantly needing to program it in. Also, the unit may not be allowing you to set the limits.

Note: Due to limited stock, please call us on 03 8789 3221 prior to purchase to ensure availability. Also, the covers are not reconditioned as they’re for protective measures

B&D™ MPC3 Reconditioned Control Panel

Suitable for use on B&D MPC3 Roller door openers.

When you might need this?
The unit seems to be “forgetting” your remotes, and you find yourself constantly needing to program it in. Also, the unit may not be allowing you to set the limits.

Note: Due to limited stock, please call us on 03 8789 3221 prior to purchase to ensure availability. Also, the covers are not reconditioned as they’re for protective measures.

B&D™ MPC Wall Panel Harness (Reco)

Suitable for use on MPC and MPC3 Roller door openers.

When might you need this?
There is no power being supplied to the wall panel, although there is power at the power point. However, this could also be a Control Board problem.

B&D™ MPC Ring Gear Pack (Reco)

Suitable for use on B&D MPC Roller door openers.

When might you need this?
You can hear the opener running, but the door is not moving. The opener could be stalling and/or shuddering mid-cycle. Please ensure that the opener is not disengaged.

Note: There are 2 different kinds of ring gears in the MPC series. This one is secured to the chassis via a plastic ring gear retainer (pictured to the right), the other is secured to the chassis by a washer and cir-clip. If you require the latter, please make note of it in the “Instructions to Merchant” window when prompted.

B&D™ MPC Roller Ring Gear Retainer (Reco)

Suitable for use on B&D MPC Roller door openers.

When might you need this?
It appears as if the ring gear is pulling away from the main chassis.

B&D™ MPC Roller Drive Gear Pack (Reco)

Suitable for use on B&D MPC Roller door openers.

When might you need this?
You can hear the opener running, but the door is not moving. Please ensure the opener is not disengaged.

B&D™ MPC Roller Door Series Disengagement Lever (Reco)

Suitable for use on MPC, MPC-2 and MPC-3 Roller door openers.

When you might need this?
You are unable to put the opener into manual operation mode.

B&D™ MPC4 Nose Cone (Reco)

Suitable for use on MPC4 Panel and Tilt door openers.

When you might need this?
The chain keeps coming off at the front of the shaft.

B&D™ Chain Index and Shuttle Pack

Suitable for use on MPC4 systems and GD02.

When installing, shuttle will be mounted in reverse.

B&D™ MPC4 Chopper Wheel (Reco)

Suitable for use on MPC4 Panel and Tilt door openers.

When might you need this?
You are unable to set the limits on the opener and/or the opener cuts out a few seconds after activation.

Shuttle

To suit B&D TRG or Merlin garage door systems.

Chain Index

Suitable for B&D TRG Openers

B&D™ TRG Limit Assembly

Suitable for use on TRG Panel and Tilt door openers.

When might you need this?
The motor continues to run once it reaches the desired opening and closing positions. The opener may auto-reverse shortly after it reaches the close position.

Merlin™ TRG/230T Limit Striker

Suitable for use on 230T Panel and Tilt door openers also compatible for B&D TRG Opener

When might you need this?
The motor continues to run once it reaches the desired opening and closing positions. The opener may auto-reverse shortly after it reaches the close position.

B&D™ TRG Drive Sprocket

Suitable for use on TRG Overhead door openers.

When might you need this?
You can hear the motor running, but the chain is not moving.

Due to limited stock, please call us on 03 8789 3221 prior to purchase to ensure availability.

B&D™ TRV Motor (Reco)

Suitable for use on TRV Panel and Tilt door openers.

When might you need this?
The motor is extremely sluggish and may stall during operation. You will likely find that this occurs more often during the opening cycle, but may soon start occurring during the closing cycle as well. Please ensure that the door is properly mentioned.

B&D™ TRV Belt

Suitable for use on TRV Panel and Tilt door openers.

When might you need this?
You can hear the motor running, however, the chain does not appear to be moving.

B&D™ TRV Belt Wheel (Reco)

Suitable for use on TRV Panel and Tilt door openers.

When might you need this?
You can hear the motor running, however, the chain does not appear to be moving.

B&D™ TRV Forward Sprocket

Suitable for use on TRV Overhead door openers.

When might you need this?
You can hear the motor running, but the chain is not moving.

Note Due to limited stock, please call us on 03 8789 3221 prior to purchase to ensure availability.

B&D™ TRV Return Sprocket

Suitable for use on TRV Overhead door openers.

When might you need this?
You can hear the motor running, but the chain is not moving.

Note Due to limited stock, please call us on 03 8789 3221 prior to purchase to ensure availability.