ATA – NeoSlider NES-24V3 Installation Manual
Coding Transmitter
IMPORTANT NOTE: Only TrioCodeTM128 Technology Transmitters are compatible with this product.
NeoSliderTM can store up to thirty (30) transmitters in its memory. Each transmitter can be allocated an alpha-numeric ID label up to eleven (11) characters in length and each button can be assigned to one of several control functions. The settings for a transmitter are represented in (Fig. 10.1). It shows the transmitter’s store number, ID label or serial number and the functions assigned to each of its four buttons. To toggle between ID/SN display, press UP/DOWN with the cursor on the ID/SN indicator. The procedures below code, delete, replace, edit and copy transmitter records.
10.1 Coding Transmitter Button
Navigating To Menu 1 “Code Transmitter”
a. Press NEXT to navigate to Menu 1 (Fig. 13.2).
b. Press SET to enter the code set procedure.
Storing Transmitter Code
c. The controller will prompt to press one of the transmitter’s buttons.
d. Press the transmitter button you wish to use to operate the Gate Opener (e.g. button 1) (Fig. 10.3) .
e. Press the same transmitter button again as prompted by the display (Fig. 10.3).
10.2 Selecting Function Of The Button
The controller will now show the transmitter’s record, with a cursor on the field for the button being coded (Fig. 10.4). Use UP/DOWN arrows to select the function for the button.
Available functions:
| VAC (Vacation Mode) | LGT (Courtesy Light) |
| STP (Stop) | OPN (Open) |
| CLS (Close) | SWP (Swipe) |
| PED (Pedestrian access) | OSC (Open/Stop/Close) |
| OFF (No action) |
Press SET to save the settings or EXIT to abort without saving.
10.3 Returning To Main Screen
The “Code Transmitter” menu will now be shown. Press EXIT to return to the MAIN SCREEN and test the transmitter.
