GRIFCO Maestro Manual

Grifco Advanced Users
QUICK START GUIDE

CONNECTING POWER
• Open enclosure
• Feed leads through conduit entry
• Attach power leads to correct positions on power terminal block according to motor type (Refer page 5)
• Connect controller using 6 metre cable (RJ45 sockets)

IF DOOR DIRECTION IS INCORRECT:
• While holding set, press the stop button 3 times
• The limit indicator will flash
• Hold stop for 10 seconds until limit indicator flashes quickly
• Press stop to exit

TO SET LIMITS
• While holding the STOP button, press and release the SET button 3 times
• The limit indicator will flash
• Move door into closed position
• Press SET, indicator will flash quickly
• Move door into open position
• Press SET, indicator will flash quickly, then go off