Tilt Door T-Type Fittings & Spare Parts
Identification guidance for T150, T250 and T300 tilt-door fittings, power arms, springs and related parts.
T-Type Systems
Confirm the exact T150, T250 or T300 system
T-Type tilt-door fittings are selected as complete systems. Door size, an old weight figure or visual similarity alone is not enough to select a safe replacement.
Earlier AGG references included:
- T150, T250 and T300 fitting sets and site packs;
- T150, T250 and T300 springs;
- T150, T250 and T300 power arms;
- left- and right-hand top weather-seal and wheel assemblies; and
- T150 and T250/T300 kicker bolts.
These names support identification only. They do not confirm current stock, current specifications or interchangeability. The image shows a tilt-door type generally, not a T-Type fitting diagram.
Selection and Safety
Do not select fittings from door size alone
Provide photographs of both complete fitting assemblies, the current part number, left/right handing, the viewing convention used and the door construction.
Professional assessment is required because:
- springs and power arms are loaded hardware;
- door construction and balance affect fitting selection;
- left- and right-hand components must be identified correctly;
- site packs and fitting sets may have different inclusions; and
- legacy parts may require a supported alternative.
Do not loosen, remove, stretch or substitute springs, arms, brackets or fittings as a DIY repair.
T-TYPE TILT DOOR PARTS
Frequently Asked Questions
Identification guidance only—not installation instructions.
NEED A T-TYPE FITTING IDENTIFIED?
Send photos of both sides, the full assemblies and model markings.
